PRECAUTIONS Notice for this monitor CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment Important Please read this User’s Manual, and the Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage.
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed.
PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor.
WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Use the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors.
WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots.
Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product may not be covered by warranty for uses other than those described in this manual. The specifications noted in this manual are only applicable when the following are used: • Power cords provided with the product • Signal cables specified by us Only use optional products manufactured or specified by us with this product.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. • Do not allow liquid to enter the clearance between the panel and the panel frame. NOTE • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
CONTENTS Cover . ............................................................ 1 PRECAUTIONS....................................................... 1 Notice for this monitor............................................... 5 Cleaning.................................................................. 6 To use the monitor comfortably............................ 6 CONTENTS.............................................................. 7 Chapter 5 Reference..........................................
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-D and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24.
1-3 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 10 for operation) (for analog signal input only) 1 • The Adjustment menu and the FineContrast mode cannot be displayed at the same time. Page 15 Color Adjustment (Simple adjustment) [FineContrast mode] This function allows easy selection of a desired mode from three modes according to monitor application.
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Information Page 19 ● To check settings, usage time, etc.
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a touch panel driver, an application software program for adjustment, and User's Manual. Refer to “Readme.txt” on the disk for software startup procedures or file access procedures.
2-2 Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. Analog Input The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used. To use the monitor comfortably, adjust the screen when the monitor is set up for the first time or when the settings of the PC in use are updated.
3 NOTE Perform advanced adjustments for the following using the • Press the control button slowly so as not to miss the adjustment point. • When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering or blurring. menu of the Adjustment menu. ● To eliminate vertical bars [Clock] (1) Choose from the menu, and press The menu appears. (2) Adjust the clock with or The adjustment is completed. , and press . .
4 Adjust the signal output range. ● To adjust color gradation automatically [Range] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose from the menu, and press . (2) Select “Execute” with or , and press . (3) Color gradation is adjusted correctly by the auto-adjustment function. The output range is adjusted automatically. When using the “Screen Adjustment Program”, the program is finished. 5 Change the smoothing setting.
2-3 Color Adjustment Simple Adjustment [FineContrast Mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast mode An appropriate display mode is selectable out of three modes. Mode Purpose Custom Available for making desired setting. sRGB Suitable for color matching with sRGB compatible peripherals. Text Suitable for displaying texts for word processing or spreadsheets. FineContrast mode name Example) Custom Displays current mode.
Advanced Adjustments [Adjustment Menu] Attention Independent setting and saving of color adjustment are available for each FineContrast mode.
2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. Attention • The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice.
2-5 Power Indicator/EIZO Logo Display Settings ● To turn off the Power indicator while a screen is displayed [Power Indicator] This function enables to turn off the Power indicator (blue) while a screen is displayed. . (1) Choose from the Adjustment menu, and press (2) Choose from the menu, and press NOTE • The Power indicator lights up at power on with the default setting. . The menu appears. (3) Select “Disable” with or , and press .
2-7 Setting Adjustment Menu Position ● To adjust the menu position [Menu Position] Adjust the menu position using the following procedure. NOTE . (1) Choose from the Adjustment menu, and press (2) Choose
2-10 Resumption of Default Setting ● To reset color adjustment [Reset] NOTE The hue in the color mode currently set will revert to the default settings (factory settings). (1) Choose from the Adjustment menu, and press (2) Choose from the menu and press . . The menu appears. (3) Select with or The reset operation is completed. , and press . ● To reset all settings [Reset] Reset all adjustments/settings to the factory default settings.
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples D-sub mini DVI-D connector 15-pin Connector Attention • The touch panel monitor is designed to use connecting to one PC. If connecting two PCs, connect the touch panel monitor to one PC only (touch operation side) with a USB cable (MD-C93) or RC-232C cable (FD-C38-K).
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • • • • No-picture problems → See No.1 - No.2. Imaging problems → See No.3 - No.11. Other problems → See No.12 - No.13. Touch panel problems → See No.14 - No.17. Problems 1. Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • Press . • Power indicator is lighting blue.
Problems Possible cause and remedy 8. Afterimages appear. 9. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a on the screen. failure. 10. The display image is appeared in lengthwise. • Use a screen saver or off timer function for a long-time image display. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. • Check whether the kind of cables connected with the monitor and the PC.
Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable 2 Remove the stand. (Prepare a screwdriver.) 3 Attach the monitor to the arm or stand. surface with the panel surface facing down. Unscrew the four screws securing the unit and the stand with the screwdriver.
5-2 Power Saving Mode Analog input This monitor complies with the VESA DPM standard. [Power Saving System] PC Operating Power saving Power Indicator Monitor STAND-BY SUSPENDED OFF Operating Blue Power saving Orange [Resumption Procedure] • Operate the mouse or keyboard to resume the normal screen. Attention • Unplugging the power cord completely shuts off power supply to the monitor. • Do not setup Standby function for the PC.
5-3 Specifications LCD Panel 15-inch (38 cm) TFT color LCD with anti-glare hard coating Viewing angle: Horizontal 160°, Vertical 130° (CR: 10 or more) Dot Pitch 0.297 mm Horizontal Scan Frequency Analog: 24.8 - 60 kHz Digital: 31 - 49 kHz Vertical Scan Frequency Analog: 55 - 75 Hz (Non-interlace) Digital: 59 - 61 Hz, (VGA Text: 69 - 71 Hz) (Non-interlace) Resolution 1024 dots × 768 lines Max. Dot Clock Analog: 80 MHz Digital: 65 MHz Max. Display Colors Approx. 16.
Main default settings (factory settings) BrightRegulator Disable Smoothing 3 FineContrast Mode Custom Input Signal Auto Off Timer Disable Language English Outside Dimensions unit : mm (inch) 313(12.3) 81(3.19) 35° 35° SWIVEL TILT 3 0° 69(2.72) 38.5 (1.52) 100(3.9) 90(3.54) 65.5(2.58) 419.5(16.5) 123(4.8) 99.5(3.56) 229.3(9) 280(11) 379.5(14.9) 100(3.9) 90(3.54) 123(4.8) 119(4.7) 346(13.6) 305.4(12) 200(7.9) 175(6.9) 217(8.5) 43.5 (1.
Connector Pin Assignment • DVI-D connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No. Signal Pin No. Signal Pin No.
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DVI (Digital Visual Interface) DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
5-5 Preset Timing The following table shows factory preset video timing (for analog signal only). Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA TEXT 720× 400@70Hz 28.3 MHz PC-9801 640×400@56Hz 21.1 MHz PC-9821 640×400@70Hz 25.2 MHz VESA 640×480@72Hz 31.5 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@56Hz 36.0 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@72Hz 50.0 MHz VESA 800×600@75Hz 49.5 MHz VESA 1024×768@60Hz 65.0 MHz VESA 1024×768@70Hz 75.0 MHz VESA 1024×768@75Hz 78.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan T1501-B/T1502-B is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
5th Edition-November, 2012 Copyright © 2009-2012 EIZO NANAO CORPORATION All rights reserved. 03V22645E1 (U.
