User`s manual

3
English
TroubleshootingSetting/AdjustmentPrior to use Installation
Connecting Cables
Attention
•WhenreplacingthecurrentmonitorwithaT1501-B/T1502-Bmonitor,besuretochangethePCsettings
forresolutionandverticalfrequencytothosewhichareavailablefortheT1501-B/T1502-Bmonitor
referringtotheresolutiontable(backofcoverpage)beforeconnectingthePC.
NOTE
•WhenconnectingtwoPCstothemonitor,refertotheUser’sManualontheCD-ROM.
1
Check that the monitor and the PC are powered off.
2
Connect the monitor to the PC with a signal cable that matches the connectors.
Afterconnectingthecableconnectors,tightenthescrewsoftheconnectorstosecurethecoupling.
Connectors on
the PC
DVI-Dconnector
D-submini15-pin
connector
Connectors on
the monitor
DVI-Dconnector
D-submini15-pin
connector
Stereo mini jack cable (supplied)
Signal cable MD-C87 (supplied)
Digital connection
Analog connection
CD player, etc
Signal cable FD-C39 (supplied)
Audiooutput
connector
Audioinput
connector
or
3
Plug the power cord into a power outlet and the Power connector on the monitor.
Adjusting the Screen Angle
Tilt and swivel the screen to the best condition for working.