User`s manual

26
Chapter 5 Reference
Chapter5 Reference
5-1HowtoAttachtheOptionalArm
An optional arm (or an optional stand) can be attached by removing the stand
section. Please refer to our web site for the corresponding optional arm (or
optional stand).
http://www.eizo.com
[Attaching]
1
 LaytheLCDmonitoronasoftclothspreadoveronastable
surfacewiththepanelsurfacefacingdown.
2
 Removethestand.(Prepareascrewdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3
 Attachthemonitortothearmorstand.
Secure the monitor to the arm or stand using the screws specied in the
user’s manual of the arm or stand.
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, conrm the following in
advance and select one conforming to
the VESA standard. Use M4 × 12 mm
screws supplied with the monitor.
– Clearance between the screw holes:
100 mm × 100 mm
– Thickness of plate: 2.6 mm
– Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• When using an arm or stand, attach it
to meet the following tilt angles of the
monitor.
– Up 60 degrees, down 45 degrees
(horizontal display)
– Up 45 degrees, down 45 degrees
(vertical display, 90 degrees
clockwise)
• Connect the cables after attaching an
arm or a stand.