User`s manual

RadiCS
Chapter 8 Other Functions
63
English
8-3. Monitor Status Monitoring Function
With the following two functions, the monitor status is monitored and the results are displayed.
- Status Analyzer: Executes diagnostics and displays the results.
- Backlight Meter: Performs the backlight monitoring and displays the estimated monitor
lifetime (the remaining time that the recommended brightness can be maintained).
Confirmation
[Procedure]
1. When selecting [Configuration](Advanced mode)/[Configuration/View](User
mode) and then clicking [Change Settings] from the menu bar, the setting dialog
appears.
2. Clic
k [Monitor Status] to display the monitor status screen.
Tips
•
Right-click the RadiCS icon on the task tray and select “Monitor Status” to display the
Monitor Status screen.
Status Analyzer:
Monitor Model name and S/N: serial number are displayed.
Status The diagnoses results are displayed.
OK: passing
Warning: failed
-: diagnosis is not performed
Date & Time The date and time when the diagnosis was performed are displayed.
Identification The monitor information is displayed on the screen of the target monitor
for 3 seconds.
Model name S/N: serial number Status
* When the status is “Warning”, the status is displayed in red-letter.
Backlight Meter:
Monitor Model name and S/N: serial number are displayed.
Status The backlight status is displayed. The graph indicates the lifetime.
OK: the value is bigger than the set threshold (green graph)
Caution (LEA time): the value is smaller than the set threshold (red
graph)
-: backlight monitoring is not performed
Operating
Time
The operating time when the backlight monitoring was performed is
displayed.
Date &
Time
The date and time when the backlight monitoring was performed are
displayed.