User`s manual

RadiCS
Chapter 6 Scheduling
48
English
Activate Scheduler
Enable the check box to use a scheduler.
Pattern Check
Luminance Check
Grayscale Check
Uniformity Check
Calibration
Backlight Sensor
Diagnostics
Enable the corresponding check box to execute Pattern
Check, Luminance Check, Grayscale Check, Uniformity
Check, Calibration, Calibration (Backlight Sensor), or
Diagnostics.
Change Click to change the schedule for Pattern Check, Luminance
Check, Grayscale Check, Uniformity Check, Calibration,
Calibration (Backlight Sensor), or Diagnostics.
Policy Set up execution conditions for each task set in the
scheduler.
At logon: Execute tasks when logging on Windows after the date set
in the scheduler comes.
Enable the compulsory execution check box when only the
pattern check is executed compulsorily.
At recovering
from screen
saver:
Execute tasks when a screen saver is recovering after the
date set in the scheduler comes.
On schedule: Execute tasks when the date set in the scheduler comes.
Executes the
process when
the operator
is not present:
For the monitor which has a Clip-On Swing Sensor G2/
Presence Sensor installed and the Presence Sensor set to
ON (refer to page 23), specify whether the schedule is to be
executed when you are not in front of the monitor.
Proceeds the task before shutdown.
Enable this check box to execute Monitor Quality Control before shutdown.
Note
•
To execute Monitor Quality Control, a Windows group policy settings are required. (Refer
to the next page.)
•
Applicable only to task execution using the Swing Sensor/Integrated Front Sensor.
Proceeds the task when
[ ] seconds elapse after
shutdown starts:
Specify the time to wait before starting Monitor Quality
Control (0, 30, 60, 120, 300, or 600 seconds).
Click [Change] in Task/Diagnostics to set up the followings
Every day Set up a starting time.
Every week Set up a day and a starting time.
Every month Specify a date and a starting time.
Quarter Specify a date, a month and a starting time.
Biannual
Annual
Every login Sets the software so that pattern check is executed at logon.
At application
startup
Sets the software so that pattern check is executed when the
registered application is started.