User`s manual

RadiCS
Chapter 5 Monitor Setup
44
English
5-2. Pattern Display
Displays a pattern image used for acceptance test/constancy test on either an optional
monitor or all connected monitors. It displays only a selected pattern and does not set up
or check patterns.
Tips
• See Chapter 9 for description of each pattern.
[Procedure]
1. Click “Pattern” on the menu.
2. Select a pattern and click [Display]. To display a pattern for user setting, click
[User...], select a pattern and click [OK].
A selected pattern will be displayed to full screen.
To return to the previous screen, either click the left mouse button on the displayed
pattern or press “Enter” on the keyboard.
Reversing display The pattern of white and black is displayed inverted.
It will gray out if a selected pattern is not compliance with
reversing display.
Shows all monitors Patterns are displayed on all the set monitors.
Tips
• For GS521-ST, if pattern images are not displayed, a black image is displayed in full screen.