User`s manual

RadiCS
Chapter 4 Acceptance Test / Constancy Test
36
English
2. Click “Task” and enable the check box of the item to whicn the constancy test is
executed.
3. Click “Pattern” and set up a pattern for the constancy test.
The contents set in the task setup wizard appear and can be confirmed.
Set 1 - 5 Allows up to five types of pattern sets to be set.
Description Edit the descriptive text for a pattern set.
(See “How to Edit the Description”)
Pattern List A list of patterns for the pattern check appears. “Reversed”
allows the display in reverse black and white order. See “Chapter
9 Pattern”.
Pattern Selection Select a pattern for a pattern check (to select a pattern for user
setting, see “How to Display a Pattern for User Setting”).
Add Add patterns (To add a pattern for user setting, see “How to
Display a Pattern for User Setting”).
Delete Delete patterns.
Move Up Move up the selected pattern in the list of patterns.
Move Down Move down the selected pattern in the list of patterns.
Preview Confirm preview images of the selected pattern.
Bitmap Image A preview image fills the whole screen.
Default Set up the default value.
Check Point Edit questions about selected patterns from the list. (See “How
to Edit a Check Point”)
How to Edit the Description
Enter the descriptive text of up to 128 one-byte characters in “Description”.
How to Edit a Check Point
Enter questions within 450 characters in the check point.
Note
• Users must answer “YES” if there is no problem and must answer “NO” if there is a
problem. Please consider the following things when making questions.
-
Questions must be in question formation.
e.g. “Is the Convergence setting OK?”
-
Make questions to turn answers to be “YES” if the result of the pattern check has
no problem.