User`s manual

RadiCS
Chapter 3 Monitor Calibration
28
English
7. The Lmax adjustment window is displayed. Click [Calibration settings] and then
set the target (Lmax:).
8. Click [Measure].
The luminance is measured by the sensor and the measurement value is displayed. Use the
monitor brightness adjustment function to set the luminance to the (1) target displayed in
the Lmax adjustment window.
9. Click [Measure].
The [OK] button becomes valid when the measurement value is the (2) target or higher.
10. Click [OK]. The result will appear when finishing calibrating a monitor connected
to the computer.
(1)
(2)