User`s manual

RadiCS
Chapter 3 Monitor Calibration
26
English
6. Attach the sensor to the measurement window then click [Proceed].
Tips
• A calibration message and a measurement window are displayed in each monitor when
several monitors are connected. Click [Skip] to move a message onto the next monitor
when a message and a measurement window are displayed on the monitor.
7. Follow the instructions on the message to continue calibration.
8. The result will appear when finishing calibrating a monitor connected to the
computer. To calibrate other monitors, click [Next Monitor]. To exit calibration,
click [Exit].
Note
• The adjustment will be locked after calibration when using a monitor. Unlock the
color adjustment to adjust the color in the specific mode. (Refer to the user’s manual of
monitor.)