User`s manual

English
Problems Points to check with possible solutions
14. Cursor position is not correct. /
Cursor jumps.
 When cursor position is incorrect or cursor
jumps, turn off and on the monitor. If the
symptom is not improved, perform the
calibration on the monitor.
• Do not touch the screen while turning on the
PC and the monitor. Touch the screen one
second later after appearing the image.
• Changing the position or angle of the
monitor will cause cursor jump.
 The drawing touch and dragging the fi nger on
the touch panel to draw the picture may cause
incorrect cursor position.
 Keep metals away from the panel surface.
 Touch with one finger only. Keep other fingers
away from the touch screen. Do not rest the
hand in the monitor or bezel while touching the
screen.
 The spray for preventing static electricity may
infl uences the sensibility of the touch panel. Do
not use it on cleaning.
15. No touch sound.
 Under Windows 7, touch sound is only output
through the audio output terminal of the PC. To
hear touch sound, connect speakers.
 The touch sound may not be output from the
external line out of the PC depending on the
hardware configuration.
6. TROUBLESHOOTING
29