User`s manual

Chapter2AdjustingScreens

●

To perform advanced adjustments

The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each

mode.

Attention

• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more

after turning the monitor power on before starting adjustment.

• Perform the range adjustment rst when adjusting color for analog signals (see “To adjust color gradation

automatically” (page 25)).

• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.

Make ne color adjustment visually when matching colors on multiple monitors.

Note

• The value shown in “K” is available only as reference.

• Using the “ScreenManager Pro for LCD (DDC/CI)” allows you to perform the color adjustment by using the mouse

and keyboard of your PC. (Refer to “Chapter 4 Color Adjustment” in the User’s Manual for “ScreenManager Pro for

LCD (DDC/CI)”.)

●

Adjustable settings in each mode

The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)

For instructions on how to adjust or set each function, refer to subsequent pages.

√: Adjustable -: Not adjustable

Function

Color Mode

User1 User2 sRGB Paper Movie

Brightness √ √ √ √ √

Contrast √ √ - - √

Temperature √ √ - √ √

Gamma √ √ - - -

AdvancedSettings Saturation √ √ - - √

Hue √ √ - - √

Overdrive

√ √ - - -

Gain √ √ - - -

ColorReset √ √ √ √ √

EV2335W only