User Manual

27
Chapter 5 Troubleshooting
5-3. Imaging Problems (for analog only)
Problem Possible cause and remedy
1. Display position is incorrect. • Use "Menu Position" in the Setting menu to correct the image
position (see “Hor. Position” (page 20)).
• If the problem persists, use the graphics board’s utility if
available to change the display position.
2. Vertical bars appear on the screen or
apartoftheimageisickering.
• Use "Clock" in the Setting menu to adjust it (see “Clock” (page
20)).
3. Wholescreenisickeringorblurring.
• Use "Phase" in the Setting menu to adjust it (see “Phase” (page
20)).