User Manual

●
Signal Settings
Set the details regarding input signal, such as the screen display size and color format.
Function Setting Value Description
Window Selection Left
Right
Upper Left
Lower Left
Upper Right
Lower Right
Large Window
Small Window
Select the target for the signal settings.
When using PbyP/PinP display, select this target rst.
• “Left”
The setting is applied to the left screen in PbyP display (dual
screen).
• “Right”
The setting is applied to the right screen in PbyP display
(dual screen).
• “Upper Left”
The setting is applied to the upper left screen in PbyP
display (quad screen).
• “Lower Left”
The setting is applied to the lower left screen in PbyP
display (quad screen).
• “Upper Right”
The setting is applied to the upper right screen in PbyP
display (quad screen).
• “Lower Right”
The setting is applied to the lower right screen in PbyP
display (quad screen).
• “Large Window”
The setting is applied to the large window in PinP display.
• “Small Window”
The setting is applied to the small window in PinP display.
Note
• Enabled only during PbyP/PinP display.
• For details on PbyP/PinP, see “2-2. Switching Input Signals”
(page 15).
26
Chapter 3 Advanced Adjustment / Setting