User’s Manual Color LCD Monitor Important Please read this “User’s Manual”, and “PRECAUTIONS” (separate volume) carefully to familiarize yourself with safe and effective usage. ••Refer to the “Setup Guide” for information on the installation / connection of the monitor. ••For the latest product information including the “User’s Manual”, refer to our web site : www.eizoglobal.
Location of Caution Statement This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content (Assuming usage of approximately 12 hours per day). If using this product for the following kinds of applications, where an extremely high degree of reliability and safety is required, then measures should be in place to maintain safety while using this product.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the monitor. Cleaning The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water or by using ScreenCleaner (available as an option).
CONTENTS Notice for this monitor.......................................... 3 Chapter 5 Troubleshooting............................... 28 Cleaning..................................................................... 4 5-1. No Picture..................................................... 28 To use the monitor comfortably.............................. 4 5-2. Imaging Problems........................................ 29 CONTENTS.............................................................. 5 5-3.
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features ●●High Degree of Flexibility for Installation •• This product can be used as an external monitor of a notebook computer. •• By attaching the monitor to an arm, the screen can be rotated 180° (upward-downward rotation) and used in a multi-monitor configuration. Note •• In order to rotate the display of the monitor 180°, it is necessary to configure the settings for the computer.
●●Reduction of Power Consumption This product provides a function that automatically adjusts the screen brightness to reduce power consumption *1. Power Reduction, CO2 Reduction, and Eco Performance Level can be checked on the "EcoView Settings" menu. (page 15) •• Auto EcoView The ambient light sensor on the front of the monitor detects the ambient brightness to automatically adjust the screen brightness to a comfortable level.
1-2. Controls and Functions ●●Front 1 2 1 3 4 5 1. Speakers Outputs audio. 2. Ambient light sensor Detects ambient brightness. If you use Auto EcoView, the screen brightness is automatically adjusted according to the ambient brightness (page 15). 3. Operation switches Displays menus. Operate the switches according to the operation guide (page 17). 4. Power switch Turns the power on or off. 5. Power indicator Indicates the monitor’s operation status.
●●Rear 8 6 9 10 7 11 12 13 14 6. 7. 8. 9. 10. 15 Handle Security lock slot Lock button Headphone jack Stereo mini jack 11. USB Type-A connector (USB downstream port) 12. Cable cover 13. Stand*1 14. Main power switch 15. Power connector 16. Input signal connectors 16 17 11 This handle is used for transportation. Complies with Kensington’s MicroSaver security system. Use this button to remove the monitor from the stand. Connects to headphones.
1-3. Supported Resolutions The monitor supports the following resolutions. Resolution Vertical scan frequency (Hz) 640 × 480 59.940 640 × 480 60.000 720 × 400 70.087 720 × 480 59.940 720 × 480 60.000 720 × 576 50.000 800 × 600 60.317 1024 × 768 60.004 1280 × 720 50.000 1280 × 720 59.855 1280 × 720 59.940 1280 × 720 59.979 1280 × 720 60.000 1280 × 800 59.810 1280 × 800 59.910 1280 × 1024 60.020 1280 × 1440 59.902 1600 × 900 60.000 1600 × 1200 60.000 1680 × 1050 59.883 1680 × 1050 59.954 1920 × 1080 50.
1-4. Changing the Computer Display Settings If the image is not displayed properly after connecting the monitor to a PC, follow the procedure below to change the display settings on the computer. ●●Windows 10 1. Right-click the mouse anywhere on the desktop except on icons. A menu is displayed. 2. From the displayed menu, click “Display Settings”. The “Settings” screen is displayed. 3.
Chapter 2 Basic Adjustment / Setting This product enables users to change the brightness according to personal preference or to suit the usage environment, and to reduce power consumption to conserve energy. This chapter describes the basic functions that can be adjusted and set using the switches on the front of the monitor. For advanced adjustment and setting procedures using the Setting menu, see “Chapter 3 Advanced Adjustment / Setting” (page 17). 2-1. Switch Operation Method 1.
2-2. Switching Input Signals When a monitor has multiple signal inputs, the signal to display on-screen can be changed. Note •• "Screen InStyle" allows you to switch input signals using the shortcut keys on the keyboard. •• By selecting PbyP (Picture by Picture) display when a monitor has multiple input signals, windows can be displayed side-by-side. Because 2 windows can be displayed on a single monitor, the need for changing between signals is eliminated, which leads to increased work efficiency.
2-3. Switching Display Modes (Color Modes) This product is preinstalled with color modes for various display purposes. By switching the mode according to the purpose and contents of the display, you can display images in an appropriate manner. ●●Display Modes Color Mode User1 User2 sRGB Purpose Select either of these modes to set a user-defined display mode.
2-4. Conserving Energy This monitor is equipped with EcoView functions to enable users to conserve energy. If you use Auto EcoView, which is one of the EcoView functions, the screen brightness is automatically adjusted according to the ambient brightness. Function Auto EcoView Setting Value On Off Description The ambient light sensor on the front of the monitor detects the ambient brightness to automatically adjust the screen brightness to a comfortable level using Auto EcoView.
2-5. Adjusting Brightness The brightness of the screen can be adjusted to suit the installation environment or personal preference. The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Setting Value 0 to 100 2-6. Adjusting Volume The volume of the speakers and headphones can be set individually.
Chapter 3 Advanced Adjustment / Setting This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu. For basic functions, see “Chapter 2 Basic Adjustment / Setting” (page 12). 3-1. Basic Operation of the Setting Menu 1. Menu display 1. Touch any switch (except ). The operation guide appears. 2. Select . The Setting menu appears. 2. Adjusting / setting 1. Select a menu to adjust / set with and select . and select . The Sub menu appears. 2.
3-2. Setting Menu Functions ●●Color Adjustment The color mode settings can be adjusted according to personal preference. Functions that can be adjusted differ depending on the color mode.
Function Color Mode Brightness Setting Value Description User1 User2 sRGB Paper Movie DICOM Select the desired mode according to the monitor application. The color mode settings can also be adjusted according to personal preference. Select the mode for adjustment and perform adjustment using the relevant functions. 0 to 100 The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel).
Setting Value Function Advanced Overdrive Enhanced Settings Standard Off Description This function allows you to set the overdrive intensity based on the use of the monitor. Image lag can be reduced by using the “Enhanced” setting when displaying moving images. Note •• Depending on the display resolution and the setting of “Picture Expansion” (page 21), overdrive may be set to “Off”. Hue -50 to 50 Adjust the hue.
●●Signal Settings Set the details regarding input signal, such as the screen display size and color format. Function Window Selection Setting Value Left Right Description Select the application range for the signal settings. When using PbyP display, select this range first. •• “Left” The setting is applied to the left screen. •• “Right” The setting is applied to the right screen. Note •• Enabled only during PbyP display. •• For details on PbyP, see “2-2. Switching Input Signals” (page 13).
Function Input Color Format Input Range Setting Value Description Auto YUV 4:2:2 *1 YUV 4:4:4 *1 YUV *2 RGB The color format of the input signal can be specified. Try changing this setting if colors are not displayed correctly. Auto Full Limited Depending on the video reproduction device, there may be a restriction on black and white video signal levels output to the monitor. This kind of signal is called “Limited range”. On the other hand, unlimited signals are called “Full range”.
●●Preference Settings The monitor’s settings can be configured to suit the usage environment or personal preference. Function Menu Rotation Setting Value 0° 90° 270° Description When the monitor is used in a vertical position, the direction of the Setting menu can also be changed. Note •• Check whether the cables are connected properly. •• It is necessary to configure the settings of the computer to use the monitor vertically. For details, refer to our website (www.eizoglobal.com).
Setting Value Function Monitor Reset - Description Restore all settings to their default values except for the following settings. •• PbyP Picture Setup •• Settings on the “Administrator Settings” menu ●●Language The display language for menus and messages can be selected. Setting Value English, German, French, Spanish, Italian, Swedish, Japanese, Simplified Chinese, Traditional Chinese Attention •• The display language of the “Administrator Settings” menu cannot be changed.
Chapter 4 Administrator Settings This chapter describes how to configure monitor operation using the “Administrator Settings” menu. 4-1. Basic Operation of the “Administrator Settings” Menu 1. Menu display 1. Touch to turn off the monitor. 2. While touching the leftmost switch, touch for more than 2 seconds to turn on the monitor. The “Administrator Settings” menu appears. 2. Setting 1. Select an item to set with and select . The Adjustment / Setting menu appears. 2. Set with and select .
4-2. Functions of the “Administrator Settings” Menu Function Setting Value Auto Input Detection On Off Description This function automatically recognizes the connector through which PC signals are input, and displays images on the screen accordingly. •• “On” When the monitor is connected to multiple PCs, if a specific PC enters power saving mode or no signals are input to the monitor, the connector is automatically changed to another one to which signals are input.
Function Key Lock Setting Value Off Menu All Description In order to prevent changes to settings, the operation switches on the front of the monitor can be locked. •• “Off” (default setting) Enables all switches. •• “Menu” Locks the switch. •• “All” Locks all switches except the power switch.
Chapter 5 Troubleshooting 5-1. No Picture Problem 1. No picture •• Power indicator does not light up. •• Power indicator is lighting white. •• Power indicator is lighting orange. •• Power indicator is flashing orange and white. 2. The message below appears. 28 Possible cause and remedy •• •• •• •• Check whether the power cord is connected properly. Turn on the main power switch on the rear side of the monitor. Touch .
5-2. Imaging Problems Problem 1. The screen is too bright or too dark. 2. The brightness changes on its own. 3. Text is blurred. 4. Afterimages appear. 5. Green / red / blue / white / dark dots remain on the screen. 6. Interference patterns or pressure marks remain on the LCD panel. 7. Noise appears on the screen. 8. The positions of windows and icons are shifted when the monitor is turned off / on or when restored from power saving mode. 9. The color shown on the screen is not correct. 10.
5-3. Other Problems Problem 1. The Setting menu does not appear. 2. Cannot select items in the Setting menu. 3. No audio output. 4. USB devices connected to the monitor do not work. 5. The USB hub function cannot be used. 6. Power indicator is flashing orange and white. 7. Power Save function of the PC does not work normally. 30 Chapter 5 Troubleshooting Possible cause and remedy •• Check whether the switch operation lock function is active (see “Key Lock” (page 27)).
Chapter 6 Attaching/Removing the Stand 6-1. Removing the Stand The stand section of this product can be removed. Attention •• Do not move the stand up and down after removing it. If you move the stand up and down while it is not attached to the monitor, this may cause damage or injury. •• If you drop the monitor or stand, this may cause damage or injury due to the weight of the monitor and stand. 1. Raise the height of the monitor to the maximum height.
6-2. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the supported optional arm (or optional stand). www.eizoglobal.com Attention •• When attaching an arm or stand, follow the instructions of the respective User’s Manual. •• When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
6-3. Attaching the original stand 1. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the LCD panel surface facing down. 2. Remove the fixing screws on the optional arm (or optional stand), and detach the optional arm (or optional stand). 3. Attach the original stand. Insert the four tabs on the stand into the four holes on the back panel (1), and slide the stand towards the upper portion of the monitor (2). The stand clicks when it is attached correctly.
Chapter 7 Reference 7-1. Connecting Multiple PCs This product can be connected to multiple PCs and allows you to switch between the connections for display.
7-2. Using the USB Hub Function This monitor is equipped with a USB hub. It functions as a USB hub when connected to a USBcompatible PC, allowing the connection of peripheral USB devices. ●●Connection procedure 1. Connect the USB downstream port of the computer and the USB upstream port of the monitor with a USB cable. USB upstream port UU200SS USB cable (USB Type-B - USB Type-A) (Included) USB downstream port 2. Connect a peripheral USB device to the USB downstream port (page 9) of the monitor.
7-3. Specifications LCD Panel Type Backlight Size IPS (Anti-Glare) LED 68.5 cm (27.0 inch) Resolution 2560 dots × 1440 lines Display Size (H × V) 596.7 mm × 335.7 mm Pixel Pitch 0.
Physical Specifications Dimensions Dimensions (Without Stand) Net Weight Operating Environmental Requirements 611.7 mm × 359.9 mm to 554.9 mm × 233.6 mm to 268.0 mm (W × H × D) (Tilt: 35˚) 611.7 mm × 376.3 mm to 545.3 mm × 230.0 mm (W × H × D) (Tilt: 0˚) 611.7 mm × 364.4 mm × 53.7 mm (W × H × D) Approx. 8.5 kg Net Weight (Without Stand) Height Adjustment Range Tilt Approx. 5.7 kg Swivel 344˚ Vertical Rotation Left 90˚, right 90˚ Temperature 5 ˚C to 35 ˚C Humidity 20 % to 80 % R.H.
Appendix Trademark The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Electronics Standards Association. The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc. The USB Power Delivery Trident Logos are trademarks of USB Implementers Forum, Inc.
03V27987A1 UM-EV2760 Copyright © 2019 EIZO Corporation. All rights reserved.
