User manual

- 26 -
Chapter 3
Advanced Adjustment/Setting
Function
Input Signal
(The setting range of each function
differs depending on the input signal.)
√: Settable -: Not settable
Setting Range Description Note
DisplayPort
HDMI
DVI
PC
signal
Video
signal
Picture Expansion √ √ - √ Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be
changed.
• “Auto”
The monitor automatically changes the screen
size according to the aspect ratio and resolution
information from the PC.
• “Full Screen”
Images are stretched to full screen. Since
aspect ratios are not maintained, images may be
distorted in some cases.
• “Aspect Ratio”
Images are enlarged to full screen without
changing the aspect ratio. Since aspect ratios are
maintained, blank horizontal or vertical borders
may appear.
• “Dot by Dot”
Displays the image at the set resolution or size
specied by the input signal.
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (input signal)
- - √ - Auto
Full Screen
Aspect Ratio
Dot by Dot
Input Color Format √ - - - Auto
YUV
RGB
The color format of the input signal can be specied.
Try changing this setting if colors are not displayed
correctly.
• This setting is required
when a DVI device is
connected to the monitor
via the HDMI connector
port using a DVI-HDMI
conversion connector.
• This setting is xed to “RGB”
when receiving a DVI signal
from the DVI connector.
- √ - - YUV 4:2:2
YUV 4:4:4
RGB
- - √ - Auto
YUV 4:2:2
YUV 4:4:4
RGB