User manual
Table Of Contents
- User's Manual
- Notice for this monitor
- CONTENTS
- Chapter 1 Introduction
- Chapter 2 Adjusting Screens
- Chapter 3 Setting Monitor
- 3-1. Adjusting Volume
- 3-2. Selecting sound source while using the DisplayPort signal input
- 3-3. Enabling / Disabling DDC/CI communication
- 3-4. Locking Operation Buttons
- 3-5. Showing and hiding the EIZO logo
- 3-6. Changing Setting Menu Display Position
- 3-7. Setting Language
- 3-8. Resetting the Monitor to the Default Settings
- Chapter 4 Power Saving Functions
- Chapter 5 Troubleshooting
- Chapter 6 Reference
- Appendix
16
Chapter2AdjustingScreens
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (Non-adjustable or non-settable function cannot be selected.)
√: Adjustable -: Not adjustable
Function
FineContrast Mode
User1 User2 sRGB Paper Movie
Brightness √ √ √ √ √
Contrast √ √ - - √
Temperature √ √ - √ √
Gamma √ √ - - -
AdvancedSettings Saturation - - - - √
Hue - - - - √
Overdrive √ √ - - -
Gain √ √ - - -
ColorReset √ √ √ √ √
●
To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Adjustable range
0 to 100
Procedure
1. Press
.
2. Use
or for adjustment.
3. Press
to exit.
Note
• If you feel that the image is too dark even if the brightness is set to 100, adjust the contrast.
• Alternatively, you can use “Brightness” under “Color” in the Adjustment menu to adjust it.
• To adjust the screen brightness automatically and comfortably, see “4-3. Enabling / Disabling Automatic Brightness
Adjustment” (page 27).