User`s manual

English
10 1. Introduction
1-3. Controls & Connectors
Front
(1) ScreenManager
®
(2) Input Signal Selection Button
(3) Mode Button*
1
(4) Auto Adjustment Button
(5) Enter Button
(6) Control Buttons*
2
(Left, Down, Up, Right) *
3
(7) Power Button
(8) Power Indicator*
4
*1 Directly pressing the mode button allows you to switch a color mode between “Custom”
and “sRGB”. For details about color mode, see page 29.
*2 Directly pressing the control button allows you to adjust screen brightness. If you choosing
the “custom” color mode, you also may adjust screen contrast.
*3 These buttons are changed to Up, Left, Right, Down in case of selecting “Portrait” for <Ori-
entation> of ScreenManager <Others> (p. 20).
*4 Blue lighting, when the screen is displayed (Operation mode), is made to non-light, see
page 22. Regarding the power indicator for the “Off Timer”, see page 21.
Blue The screen is displayed
Yel low Po w e r s a v i n g
Flashing yellow (2 times for each) Power save mode Digital only
Off Power off
(3) (4) (6)(2) (5) (7)
(1)
(8)
Control Panel