User`s manual

eClient SC1 Settings

Please confirm the following settings in the [Control Panel] tab of [Terminal Properties].

[Network and Dial-up Connections] tab

- In case of the connection to the WTS/Web server through built-in LAN

• IP address setting

selecting of [Obtain an IP address via DHCP]

- In case of the connection with a LAN card

• IP address setting

selecting of [Specify an IP address] and typing “255.255.255.255”.

[DHCP Settings]

- [General] tab

: Specifying the [Target Adapter] (Built-in LAN or LAN card) [DHCP Options] tab

- [DHCP Options] tab

: Selecting [Enable DHCP Options] and typing each option number settings.

NOTE

• If the DHCP Option is used to setup the eClient SC1 for the first time,

“Terminal Connection Manager” will appear because the unit automatically

receives information from the DHCP Server. (“eClient Setup Wizard will not be

displayed.)

• If the DHCP Option is set once and needs to be canceled, please change the

key of the DHCP Server. Even if changing the DHCP Option in the eClient

SC1, the DHCP Server will overwrite the option next time the unit is restarted,

and the changes in the eClient SC1 will not be effective.

8. PRACTICAL SETUP