User`s manual

8. Set up the printer.

Set up if you are using a local printer.

NOTE

• The following is required to install a local printer.

- A printer is connected to the serial connector, the parallel connector or a USB

port.

- An RDP protocol is used for connection to a WTS.

- Microsoft Windows 2000 Server / Advanced Server / Datacenter Server /

Microsoft Windows Server 2003 Standard Edition / Enterprise Edition

/Datacenter Edition is installed in a WTS.

(1) Select [Printer] icon and click [Open] icon.

(2) Select [Add printer] icon and click [Open] icon.

(3) “WTB Printer Wizard” is displayed (Follow the direction of the dialog box.).

1. Select a printer port.

(Select “COM 1” for connecting to the serial connector, “LPTx” for the

parallel connector or the USB port.)

2. Select a model of your printer.

3. Name your printer.

9. Setup the Local sender’s setting

Setup if you are connecting to WTS/Web server by dial-up connection.

(1) Select [Dialing] icon and click [Open] icon.

[Location name]..................Choose the sender’s location (click [New] to add a

new sender’s location).

[Local Settings are:] ............Setup the local settings.

3. SETTING UP the eClient SC1