User`s manual

English

Logging off the WTS

If your SC1 starts its operation with a desktop:

1. Log off the WTS.

(1) Close all the applications.

(2) Select [Start] on the taskbar.

(3) Select [Shut Down...] and select [Logoff] of the [Shut Down Windows] dialog

box.

(4) Click [OK] on the Logoff Window.

The session ends and logs off from the WTS automatically. The “Terminal

Connection Manager” dialog box will be displayed.

If it’s connected through a dial-up, click the active button on the right bottom

of the screen.

Click the button to disconnect the dial-up connection.

2. Shut down the SC1.

There are 3 ways to shut down the unit.

• Click [Shut down] at the “Terminal Connection Manager” dialog box (or press

the power button). The “eClient Shut down” dialog box will be displayed.

Select [Shut down].

• Press the power button. The “eClient Shut down” dialog box will be displayed.

Press the power button again.

• Press the power button and leave the unit for 20 seconds. The unit will shut

down automatically.

2. OPERATION