User`s manual

English
2. OPERATION
This chapter shows how to start and end SC1/SX1 operation.
2-1. Controllers
AC INPUT
AC OUTPUT
P
owe
r SY
N
C
O
F
F
O
N
(1)
(2)
(3)
(4)
(5)
(1) Power Button
(2) Power Indicator
Power Indicator State of the unit
Blue
• Operation mode
• Screen saver is active
*
1
• No picture is displayed on the monitor
*
1, *2
Off Power is off (Wake on LAN standby)
*1
[Procedure to return to the operation mode]
- Operate the mouse or keyboard.
*2
The monitor is in the power save mode when the power save function of the
monitor is set.
(3) Connector for Switch Box
*3
(4) Switch Box
*3
(5) Power Supply Control Switch (POWER SYNC)
*4
*
3
The secondary power switch makes it easy to turn the SC1 / SX1 on and off when
stowed away under the desk or out of reach. When the enclosed switch box is
connected to the connector, it can be used as a power button. The power button on
the SC1/SX1 can be used simultaneously even if the switch box is connected.
*
4
Please refer to pg. 11 for details on the power supply control switch (POWER
SYNC).
Left View
Right View
* EIZO L567 used as an example
10 2. OPERATION