User`s manual

12. REFERENCE
12-1. an Ar
nd by removing the tilt stand and
Attaching m Stand
The eClient 630L/630L-N can be used with an arm sta
attaching the arm stand to the terminal.
NOTE
nd that satisfies the following.
ent 630L/630L-N with an arm stand, the arm stand m
VESA approved:
- Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad.
- Use an arm stand that is able to support an object weighing 8.0 kg.
- A GS approved arm stand.
- Use an arm stand with sufficient stability (mechanical firmness) to support the
weight of the monitor.
- Use an arm stand remaining that position where it is manually moved.
- Use an arm stand with the ability to tilt the monitor forward and backward.
• Please connect cables after attaching an arm stand.
Setup Procedure
1. shown below. Do not scratch
2. Remove the stand by loosening the screws (M4 x 16 mm).
3. Attach an arm stand to the eClient 630L/630L-N securely.
• Use an arm sta
- When using the eCli ust be
Lay the eClient 630L/630L-N down as
the panel.
(1)
(2)
(3)
(4)
Arm
(1), (2), (3), (4): Enclosed Screws, M4 x 12 mm
64 12. REFERENCE