User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Mouse
If you find that the pointer on the screen doesn’t move smoothly, your mouse needs to
.
(2) Turn the mouse upside down and remove the mouse trackball cover. Press the cover
ards “Open” while pulling the other side of the cover.
be cleaned. Periodically clean the mouse for your operation.
(1) Turn off the 630L
tow
(3) Remove the trackball.
(4) Wipe the trackball with a soft cloth with neutral detergent.
(5) Clean all the rollers, getting all the lint off of them.
You can use a wet cotton swab to clean the rollers. Turn them to clean the entire
roller.
(6) Remove the dust inside of the mouse.
(7) Put the trackball back into the mouse.
(8) Close the mouse trackball cover.
Press
Rollers
10. CLEANING 61