User`s manual

eClient 630L/630L-N Settings
Ple
[N
- In case of the connection to the WTS/Web serve
• IP address setting
- n
g
[DHCP Settings]
-
: Specifying the [Target Adapter] (Built-in LAN or LAN card) [DHCP Options] tab
- [DHCP Options] tab
: Selecting [Enable DHCP Options] and typing each option number settings.
ase confirm the following settings in the [Control Panel] tab of [Terminal Properties].
etwork and Dial-up Connections] tab
r through built-in LAN
selecting of [Obtain an IP address via DHCP]
In case of the connectio with a LAN card
• IP address setting
selecting of [Specify an IP address] and typin “255.255.255.255”.
[General] tab
NOTE
• If the DHCP Option is used to setup the eClient 630L/630L-N for the first time,
“Terminal Connection Manager” will appear because the unit automatically
receives information from the DHCP Server. (“eClient Setup Wizard will not be
displayed.)
• If the DHCP Option is set once and needs to be canceled, please change the
key of the DHCP Server. Even if changing the DHCP Option in the eClient
630L/630L-N, the DHCP Server will overwrite the option next time the unit is
restarted, and the changes in the eClient 630L/630L-N will not be effective.
8. PRACTICAL SETUP 57