User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Using the 630L/630L-N as a FTP server
The firmware file can be updated by the 630L/630L-N set as a FTP server when two or
more 630L/630L-N exists on the same network
NOTE
• This updating is available for OS file (NK.bin) only.
FTP Server
Update
U
p
630L/630L-N
(
FTP Server
)
1. Update a 630L/630L-N firmware.
Refer to the previous section for the updating procedure.
2. Set the FTP Server setting of the 630L/630L-N updated on Step 1.
(Refer to page 46 for the FTP service settings.)
3. Update the other 630L/630L-N.
Specify the 630L/630L-N for FTP server in the [Settings] (Refer to below).
[Server:] .............................Type IP address or full domain name of the
630L/630L-N.
[User Name:]/[Password:] ...Type the user name and password to connect the FTP.
[File Name:]........................Type the NK.bin
630L/630L-N
7. SOFTWARE UPDATING/INSTALLATION 53