User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
6-8. Security
Security Settings
[Terminal Security Enable]
...................................This enables settings on network information of the
WTS invisible to prevent from undesirable change.
• Security items
Dialog box Tab
Terminal Connection
Manager
[Configure]
Terminal Properties
“Terminal Name” and “Reset” in the [General],
[Local Resources], [Experience],
[Control Panel (except Mouse and Keyboard)],
[ICA], [Server], [Security], “Update” in the [System]
Canceling Settings
(1) Display “Terminal Connection Manager”.
(2) Press [Shift] and [F2] keys at the same time.
(3) “Enter Security Password” dialog box is displayed. Enter the password set in
the [Password] of the [Control Panel].
(4) All settings in the “Terminal Properties” will be active, remove the Terminal
Security Enable check mark on [Security] tab.
6. USING THE TERMINAL PROPERTIES 47