User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Printers
NOTE
• The eClient 630L/630L-N supports an LPTx port and a COM1 port.
• Use a RDP protocol to set the printer’s adjustment.
• If you are using the ICA protocol, please refer to the instruction manual of the
Citrix MetaFrame.
Adding another printer settings
Select [Add Printer] icon, and click [Open]. “Printer Properties” dialog box is
displayed. Setup as following the wizard (See page 18 for the details).
Deleting a printer settings
Select the printer icon, and click [Delete].
Modifying the settings
Select the printer icon, and click [Properties]. [Printer Properties] dialog box is
displayed, change the settings as needed.
6. USING THE TERMINAL PROPERTIES 43