User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Certificates
Lists the certificates stored in the 630L/630L-N. A certificate can be registered, if
an external disk is connected to this product, a certificate file can be imported.
NOTE
• When using the Secure Gateway, select its certificate and click [Add]. By
clicking the button, the certificate can be used. (The certificate’s icon changes
from
to .)
DHCP Settings
[General] ............................This allows the user to receive IP information from a
DHCP server.
[DHCP Options].................Select the [Enable DHCP Options] check box to
receive essential information about the 630L/630L-N
from the DHCP server every time the 630L/630L-N is
turned on. Refer to “Practical Setup” on page 54 for
details.
6. USING THE TERMINAL PROPERTIES 41