User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Date / Time
NOTE
• Date and time will return to the default settings if the power cord is unplugged.
[Date/Time] ........................Set date, current time, or time zone.
[NTP Server] .......................Synchronize time with the NTP Server.
Select when to synchronize time with the NTP server
(on every boot up or every time clicking the
[Synchronize] button.)
NOTE
• Synchronizing time at startup is effective when the 630L/630L-N is connecting
WTS/Web Server using a Built-in LAN connection or connection with a LAN
card.
• Getting the NTP Server information from the DHCP Server needs to satisfy the
following:
* Connect the WTS/Web Server by using a Built-in LAN connection or
connection with a LAN card
* Use the DHCP Server to get information such as IP address
* Set the NTP Server option at the DHCP Server.
40 6. USING THE TERMINAL PROPERTIES