User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
6-4. Experience (RDP protocol only)
WTS connection
[Performance] .....................Specify your connection speed to WTS connection.
Choose your connection speed from the pull-down
menu or select the setting check box.
NOTE
• This setting can be available only when connecting with WTS, which version is
5.1 or later.
[Reconnect if connection is dropped]
...................................Reconnect automatically if connection is dropped.
[Display the connection bar]
...................................Display the computer name of the connected WTS as
the connection bar.
36 6. USING THE TERMINAL PROPERTIES