User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Closing a Local Web Browser
1. Close the local web browser.
Select [Close] under the [File] on the menu bar and close the local web browser.
Return to the “Terminal Connection Manager” dialog box.
If a dial-up connection is being made, click the active button of the window on the
right of the screen.
Clicking the button disconnects the dial-up connection.
2. Shut down the eClient 630L/630L-N.
There are three ways to shut down the unit.
• Click [Shutdown] in the “Terminal Properties” dialog box (or press the power
button). “eClient Shut down” dialog box is displayed, select [Shutdown] and
click [OK].
• Press the power button. “Shut down the eClient” dialog box is displayed. Press
the power button again.
• Press the power button and leave the unit for 20 seconds. The unit
automatically shuts down.
NOTE
• It is possible to disconnect from a local web server by turn the eClient 630L/630L-N
off.
5. LOGON & LOGOFF 29