User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
5-2. Opening/Closing a Local Web Browser
Opening a Local Web Browser
1. Please follow the directions relevant on the environment of the
eClient 630L/630L-N.
(1) If the web server is on the same network (Intranet):
Go to step 2.
(2) If the web server is not on the same network, and a dial-up connection is
needed (Internet):
Click an active button of a small window on the right bottom of the screen.
Clicking the button makes a dial-up connection. Check the clock’s running,
and go to step 2.
2. Select the [Web connection] from the [Connections] tab and click
[Connect] (or simply double click the [Web connection]).
3. The local web browser opens.
It is possible to browse web pages on the Internet.
NOTE
• It is possible to switch between each session (Web pages and “Terminal Connection
Manager”) by pressing [Ctrl] + [Alt] + [End] keys.
28 5. LOGON & LOGOFF