User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
If your eClient 630L/630L-N starts its operation with an application
1. Log off from the WTS.
Close applications to log off from the WTS.
“Terminal Connection Manager” is displayed.
If a dial-up connection is running, click the active button of the window on the
right bottom of the screen.
Clicking the button disconnects the dial-up connection.
2. Shut down the eClient 630L/630L-N.
(Please refer to the previous page for shutting down the eClient 630L/630L-N.)
NOTE
• It is possible to disconnect from a WTS without closing applications in use (or
without logging off). The last view of the application is displayed when the next
connection to the WTS is made.
5. LOGON & LOGOFF 27