User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
Multi Session
You can log on to the WTS with the several connection names, and switch the active
sessions.
1. Logon with a Connection Name, as following the previous steps.
2. Press [Ctrl] + [Alt] + [End] keys after logon.
3. “Terminal Connection Manager” is displayed. Select another
Connection Name to log on to, and click [Connect]. (Or double
click the connection name.)
Repeat the step 2 to 3 to log on to another connection name.
Switching the Active Session of the WTS
Press [Ctrl] + [Alt] + [UP ARROW] key / [DOWN ARROW] key to switch the active
session.
NOTE
• The multi session is not available on a dial-in connection.
5. LOGON & LOGOFF 25