User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
In Use of RDP Protocol
1. Display [Terminal Connection Manager].
Click the [Configure] tab and [Add...] to set the connection information of the
WTS.
2. Protocol selection dialog box is displayed.
Select the “Microsoft Remote Desktop Client” (RDP).
3. “WTS Connection Wizard” is displayed.
(Setup as following the wizard.)
(1) Type the connection name and the name of the Server.
(2) Setup to enable an Automatic Logon to the WTS after connecting if you want.
(3) Select whether to display the Windows desktop screen or start up an
application.
Clicking [Finish] to return to the “Terminal Connection Manager” dialog box, the
registered connection name is displayed in the [Connection Name].
NOTE
• Please repeat step 2 to 3 to entry more than two kinds of connections.
4. ADDING & CHANGING A CONNECTION NAME 21