User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
8. Setup the Local sender’s setting
Setup if you are connecting to WTS/Web server by dial-up connection.
(1) Select [Dialing] icon and click [Open] icon.
[Location name]..................Choose the sender’s location (click [New] to add a
new sender’s location).
[Local Settings are:] ............Setup the local settings.
9. The last page of the “eClient Setup Wizard” is displayed.
Click [Finish].
Click [Yes] if a “Terminal Settings change” dialog box is displayed.
The “Terminal Connection Manager” dialog box will be displayed after restarting.
NOTE
• Click [No] to finish the “eClient Setup Wizard” and display “Terminal
Connection Manager” on the screen. The setting is not activated until the
630L/630L-N is restarted.
3. SETTING UP the eClient 630L/630L-N 19