User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
4. Set up the network environment.
[Terminal Name] ................Type the name to identify this unit on the network.
Click [Network Properties] and set up connection information according to the
connection method to WTS/Web server.
Connection method Reference page
• In case of connecting the WTS/Web through Built-in
LAN
p.14
• In case of connecting with a NE2000 compatible LAN
card:
p.14
• In case of connecting with a Cisco wireless LAN card/
Agere wireless LAN card:
p.15
• In case of a dial-up connection:
p.16
• In case of the dial-in connection (ICA protocol only) to
log on to WTS
Go to step 5
* Skip the [Network
Properties] settings
NOTE
[Dial-In Connection]
[Dial-Up Connection]
Telephone
Lines
Telephone
Lines
RAS Server
WTS
eClient
eClient
WTS FTP Server
3. SETTING UP the eClient 630L/630L-N 13