User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
3. SETTING UP the eClient
630L/630L-N
This chapter presents how to prepare for a connection with a WTS when the eClient
630L/630L-N starts up for the first time.
1. Turn on the eClient 630L/630L-N.
The power indicator turns green and a picture appears on the screen.
NOTE
• When no picture is displayed, or when the message (No keyboard connected. /
No mouse connected.) is shown on the screen, please refer to “8.
Troubleshooting” on page 59.
2. “eClient Setup Wizard” is displayed.
(Set up the 630L/630L-N according to directions of the displayed dialog box.)
3. SETTING UP the eClient 630L/630L-N 11