User`s manual
Table Of Contents
- eClient 630L/630L-N User's Manual (for Administrator) Version F
- User’s Manual Version List
- SAFETY SYMBOLS
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. CONNECTING THE eClient 630L/630L-N
- 3. SETTING UP the eClient 630L/630L-N
- 4. ADDING & CHANGING A CONNECTION NAME
- 5. LOGON & LOGOFF
- 6. USING THE TERMINAL PROPERTIES
- 7. SOFTWARE UPDATING/INSTALLATION
- 8. PRACTICAL SETUP
- 9. TROUBLESHOOTING
- 10. CLEANING
- 11. SPECIFICATIONS
- 12. REFERENCE
- INDEX
1. In case of connecting the WTS through LAN:
Connect the eClient 630L/630L-N to the network with an Ethernet
cable.
In case of a dial-up or dial-in connection:
Connect the eClient 630L/630L-N to a modem or a modem card.
NOTE
• Please remove the lid on the side of the 630L/630L-N before connecting a LAN
card or a modem card.
2. Plug a keyboard and a mouse into the eClient 630L/630L-N. If
using other devices, please connect them to the appropriate
connectors.
3. If using other devices, please connect them to the appropriate
connectors.
4. Plug the power cord into the power connector.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
10 2. CONNECTING THE eClient 630L/630L-N