Operation Manual

Chapter 4 Periodic Monitor Adjustment
35
Chapter 4 Periodic Monitor Adjustment
The monitor brightness and color gradually alter. To compensate for changes, adjusting
once every 2-4 weeks is recommended.
The monitor should be readjusted if the system configuration changes as below.
• Changing the PC or graphics board
• Changing the connector on the monitor (ex. from SIGNAL1 to SIGNAL2) to the PC
or graphics board
• Changing the monitor resolution or color
• Changing the monitor location
• Replacing the room light
Tips
• When not using the sensor, the "Readjust" button cannot be clicked.
1
Click the "Readjust" button of the Main Window
"Readjust" button
2
Start measurement
Tilt the LCD panel up slightly and attach the sensor on the displayed image. If the
sensor is unstable, slide the cable weight slowly to achieve appropriate balance.
Cable Weight
Sensor
Rear of Cable Weight
Slide Slowly