Operation Manual

Chapter 3 How to Adjust the Monitor

Select a purpose

After selecting a purpose, click "Next".

When not using the sensor, only "Matching" can be selected.

When not using the sensorWhen using the sensor

Matching

When using the sensor:

By measuring the printing paper with the sensor, the color of the monitor will be

matched to the print. You can customize the color and brightness.

Go to Step 4 "When "Matching" is selected (When using the sensor)" (page 23).

When not using the sensor:

By comparing the whiteness of your monitor with the printing paper, the color of the

monitor will be matched to the print. You can customize the color and brightness.

Go to Step 4 "When "Matching" is selected (When not using the sensor)"

(page 25).

Viewing photos

Suits your monitor to viewing photos. You can customize the brightness.

Go to Step 4 "When "Viewing photos" is selected" (page 26).

General use such as Web browsing

Suits your monitor to general use such as Web browsing. You can customize the

brightness.

Go to Step 4 "When "General use such as Web browsing" is selected" (page

27).

Calibration (for advanced users)

Calibrates the monitor. This adjustment is for advanced users. The brightness,

temperature, and gamma are speciﬁed using values. The gamut can be speciﬁed by

some models.

Go to Step 4 "When "Calibration (for advanced users)" is selected" (page 28).