User`s manual

9
English
DisplayingtheScreen
1.
Press toturnonthemonitor.
The monitor’s power indicator lights up blue.
2.
TurnonthePC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 10) for additional advice.
If using the FDX1501T proceed with installation and calibration of the touch panel driver.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord
completely shuts off power supply to the monitor.
InstallingtheTouchPanelDriver(FDX1501T)
Attention
• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and then
install it.
1.
Uninstalltheothertouchpaneldriver,ifitisinstalled.
2.
InstallthetouchpaneldriveraccordingtotheinstructionsincludedintheCD-
ROM.
For how to install the touch panel driver, see the Touch Panel Driver User’s Manual (on the CD-ROM).
3.
UsetheUSBcable(MD-C93)toconnectthemonitorandthePC.
USB
4.
RestartthePC.
CalibratingtheMonitor(FDX1501T)
Calibrate the monitor according to the Touch Panel Driver User’s Manual (on the CD-ROM).
Connectors
onthePC
Connectors
onthemonitor
USBCableMD-C93(supplied)