Important Please read this User’s Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: DuraVision FDX1001/FDV1001 is in conformity with Part 15 of the FCC Rules.
SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates an attention to be required. For example, the symbol risk of electric shock”. Indicates a prohibited action.
PRECAUTIONS IMPORTANT • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). 【Location of Caution Statement】 WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
WARNING Use the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected by strong vibration or shock. • Do not place in a dusty or humid environment. • Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.). • Do not place in a location where the steam comes directly on the screen.
WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury.
Notice for this monitor Aside from displaying microscope images, this product is also suited to the dedicated usages such as operation of terminal equipment. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
Cleaning ATTENTION • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. ● LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finishing.
CONTENTS Cover . ............................................................ 1 PRECAUTIONS................................................. 3 Notice for this monitor............................................... 6 CONTENTS.............................................................. 8 Chapter 1 Introduction......................................... 9 1-1. Features............................................................... 9 1-2. Package Contents............................................... 9 1-3.
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 10.4-inch screen • Resolution FDX1001: XGA (1024 × 768) display compliant / FDV1001: VGA (640 × 480) display compliant • Maximum brightness FDX1001: 600 cd/m2 / FDV1001: 450 cd/m2 • LED backlight LCD panel The LED backlight provides better power efficiency and reduced power consumption compared to existing fluorescent backlight LCD panels. No mercury, a hazardous substance, is used.
1-3. Controls and Functions 10 Setting menu 11 1 1 button 2 button 3 4 5 button 5 Power indicator Turns the power on or off. Blue : Operating Orange : Power off 10 7 8 9 Displays the Setting menu, fixes the setting or adjustment items on each menu, and saves the setting or adjustment results. • Used to select the setting or adjustment items, or to increase or decrease the adjustment values on each menu.
Chapter 2 Connecting Cables 2-1. Connection Procedures 1 Connects to external equipment compatible with the monitor.
(1) Connect the monitor to the PC with a signal cable that matches the connectors. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling. monitor PC D-Sub mini 15-pin connector Signal cable MD-C87 (optional) D-Sub mini 15-pin connector or Signal cable FD-C16 (optional) DVI connector ● When using video equipment (1) Connect the monitor to the video equipment with a signal cable that matches the connectors.
2 Plug the power cord of the monitor into a power outlet. (1) Connect the power cord to the AC adapter. (2) Connect the AC adapter to the Power jack of the monitor, and after that, connect the power plug to a power outlet. ATTENTION • This product does not include a power cord. Please provide separately a power cord which meets the usage requirements. • For the maximum power saving, it is recommended that the Power button be turned off.
Chapter 3 Settings and Adjustments 3-1. Basic Operation and Functions Basic operation of Setting menu 1 Displaying Setting Menu Press . 2 Setting/Adjusting 3 Exiting Choose [Exit] with or , and press . NOTE • Keeping 14 pressed for 2 seconds will also exit the Setting menu.
Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal.
3-2. Color Adjustment This will perform color adjustments. Please switch between the input screens you want to adjust and adjust them one by one. Adjustable item / adjustable value Adjusting Brightness 0 - 30 Adjusts the brightness of the backlight. Contrast 0 - 30 Adjusts the contrast. Black Level 0 - 30 Adjusts the image brightness. Sharpness Off/Low/High Adjusts the image outlines. Saturation -30 - +30 Adjusts the saturation. Hue -30 - +30 Adjusts the hue.
3-3. Configure other settings This will configure other settings. Setting item / setting value Video Aspect Nomal/100% Setting Configures the display range of the input image (overscan). “Normal” : Displays the input image with the outmost parts slightly cut off. * This is how display devices normally display images. “100 %” : Displays the entire input image on the screen.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. Common Problems Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • If the problem persists, turn off the power, and then turn it on again a few minutes later. • Power indicator lights orange. • Press • Power indicator lights blue. • Check whether the power of the connected device is turned on.
Chapter 5 Reference 5-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. ATTENTION • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. Use the M4 × 12 mm screws in use by this monitor.
5-2. Specifications FDX1001 LCD Panel Size 10.4-inch (260 mm) TFT color LCD Surface treatment Anti-glare hard coating Surface hardness 3H Viewing angle Horizontal 160°, Vertical130° (CR : 10 or more) Dot Pitch 0.2055 mm Display Area (H × V) 210.4 mm × 157.8 mm Resolution 1024 dots × 768 lines Max. Display Color Approx. 16.7 million colors PC input Horizontal Scan Frequency 24-50 kHz Vertical Scan Frequency 55-75 Hz (Non-interlace) Max.
FDV1001 LCD Panel Size 10.4-inch (260 mm) TFT color LCD Surface treatment Anti-glare hard coating Surface hardness 3H Viewing angle Horizontal 160°, Vertical140° (CR : 10 or more) Dot Pitch 0.33 mm Display Area (H × V) 211.2 mm × 158.4 mm Resolution 640 dots × 480 lines Max. Display Color Approx. 16.2 million colors PC input Horizontal Scan Frequency 24-32 kHz Vertical Scan Frequency 56-70.5 Hz (Non-interlace) Max.
Main default settings (factory settings) PC Brightness Video 30 Contrast 30 15 Black Level 30 15 Sharpness Off Saturation - 0 Hue - 0 Color Mode 1 - Video Aspect Normal Power Save Enable Reverse Off Crosshair Off Beep On Language English Outside Dimensions unit : mm (inch) 35° 35° 18 (0.71) 43 (1.69) FDX1001 22 Chapter 5 Reference 75 (2.95) 31.5 (1.24) 6.5 (0.26) 291 (11.5) 175 (6.9) 201 (7.9) 109.5 (4.3) 36 (1.42) 200 (7.9) 93 (3.66) 20 (0.79) 216 (8.
35° 18 (0.71) 43 (1.69) FDV1001 35° 75 (2.95) 31.5 (1.24) 6.5 (0.26) 291 (11.5) 88.5 (3.48) 75 (2.95) 88.5 (3.48) 109.5 (4.3) 36 (1.42) 93 (3.66) 20 (0.79) 160 (6.3) 213 (8.4) 216 (8.5) 255 (10) 20 (0.79) 20 (0.79) 30° 252 (9.9) 175 (6.9) 201 (7.9) 200 (7.9) Connector Pin Assignment • D-Sub mini 15-pin connector 3 4 5 10 15 9 1 2 8 7 6 14 13 12 11 Pin No. Signal Pin No. Signal Pin No.
5-3. Glossary Afterimage The Afterimage is particular to LCD monitors. When the monitor screen is left on for a long period without use. The Afterimage can be removed gradually by changing the displayed image. Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
5-4. Preset Timing The following table shows the factory preset video timing of the PC. ATTENTION • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. • If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display may still be incorrect even after the adjustment.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × ○ ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○： 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 ×： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×”的技术原因进行进一步说明 )
