User`s manual
3
PRECAUTIONS
IMPORTANT
• This product is intended to be used with an industrial device designed to build industrial systems.
-
Transportation systems (Ship, aircraft, train, automobile, etc.)
-
Safety devices (Disaster prevention system, security control system, etc.)
-
Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the
operating room, etc.)
-
Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities,
etc.)
-
Main line devices (Operation control for transportation, control systems specic to aircrafts, etc.)
• To ensure personal safety and proper maintenance, please read this section.
WARNING
This product is intended to be housed in an enclosure. Do not use the bare monitor
separately.
Attempting to use a malfunctioning unit may result in electric shock, or equipment damage.
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your dealer for
advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Use the enclose AC adapter.
The enclosed AC adapter is for use with this product only. Do not use the AC adapter with other
equipment. Connecting to power sources that do not match the power ratings of the AC adapter may
result in re or electric shock.
Make sure the power cord meets the following requirements.
This product does not include a power cord. Please provide separately a power cord which meets the
requirements. (For more information, please contact your dealer.)
• The power cord is compatible with the standards of the country and region in which
this product is to be used.
• The power cord has a rated value of at least 2.5A.
Power supply: 100-240Vac 50/60Hz
To disconnect the power cord, grasp the plug rmly and pull.
Tugging on the cord may damage and result in re or electric shock.
Use the correct voltage.
• The unit is designed for use with a specic voltage only. Connection to another voltage than specied
in this User’s Manual may cause re, electric shock, or equipment damage.
Power supply: 100-240Vac 50/60Hz
• Do not overload your power circuit, as this may result in re or electric shock.
Handle the power cord and AC adapter with care.
Do not place heavy objects on, pull or tie the power cord or the AC adapter. Use of a damaged cord or
AC adapter may result in re or electric shock.