Important Please read this User’s Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference.
SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates an attention to be required. Indicates a prohibited action. Using the special functions, such as screen size change (ex.
PRECAUTIONS IMPORTANT • This product is intended to be used with an industrial device designed to build industrial systems. -- Transportation systems (Ship, aircraft, train, automobile, etc.) -- Safety devices (Disaster prevention system, security control system, etc.) -- Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the operating room, etc.
WARNING Never touch the plug, AC adapter or power cord during a thunderstorm. Touching them may result in electric shock. Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. CAUTION Do not touch the power plug or AC adapter with wet hands.
Notice for this monitor This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. Only use optional products manufactured or specified by us with this product.
Cleaning ATTENTION • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the panel. NOTE • The optional ScreenCleaner is recommended for cleaning the panel surface. If necessary, the stains on the panel surface can be removed by moistening part of a soft cloth with water.
CONTENTS Cover ............................................................. 1 PRECAUTIONS................................................. 3 Notice for this monitor............................................... 5 CONTENTS ............................................................. 7 Chapter 1 Introduction........................................ 8 1-1. Features............................................................... 8 1-2. Package Contents...............................................
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • FDX1001 / FDV1001: 10.4-inch screen, FDX1201: 12.
Chapter 2 Assembly ● Exterior view FDX1001 / FDV1001 unit : mm (inch) 26(1.02) 22 (0.87) 430(16.9) 233(9.2) 46 (1.81) 26(1.02) 130(5.1) 76(2.99) 57.2±0.5 (2.25±0.02) 88.9±0.5 (3.5±0.02) 146.1±0.5(5.8±0.02) 37 (1.46) 220±1(8.7±0.04) 125(4.9) 160(6.3) 48 (1.89) 23 (0.91) 482±1(19.0±0.04) 465(18.3) 410(16.1) 213(8.4) 6×12 (0.24×0.47) （Rack mounting holes） Φ6.4 (0.
FDX1201 unit : mm (inch) 26(1.02) 22 (0.87) 430(16.9) 272(10.7) 47 (1.85) 26(1.02) 146(5.7) 88(3.46) 57.15±0.5 (2.25±0.02) 133.35±0.5(5.3±0.02) 190.5±0.5(7.5±0.02) 37.5 (1.48) 265±1(10.4±0.04) 186(7.3) 125(4.9) 70(2.76) 43.5 (1.71) 482±1(19.0±0.04) 465(18.3) 410(16.1) 247.4(9.7) 6×12 (0.24×0.47) （Rack mounting holes） Φ6.4 (0.
● How to assemble ATTENTION • This monitor can be attached to a 19-inch rack compliant with the EIA standards*1. Dimensions of rack mounting holes 15.875(0.63) 15.875(0.63) 12.7(0.5) 15.875(0.63) 15.875(0.63) 12.7(0.5) 31.75(1.25) 12.7(0.5) Wide pitch 31.75(1.25) 12.7(0.5) ... ... 450(17.7) 465.1(18.3) Universal pitch unit : mm (inch) *1 EIA standards: Standards concerning sizes of racks and devices to be stored in the racks specified by Electric Industries Association (EIA) 1.
Chapter 3 Settings and Adjustments 3-1. Buttons 1 1 button 2 button 3 4 3 4 5 Switches the input signal. button button 5 Power indicator 12 2 Displays the Setting menu, fixes the setting or adjustment items on each menu, and saves the setting or adjustment results. • Used to select the setting or adjustment items, or to increase or decrease the adjustment values on each menu. • When the settings menu is not displayed, pressing or switches between displaying and not displaying the crosshair.
3-2. Basic Operation and Functions Basic operation of Setting menu 1 Displaying Setting Menu Press . 2 Setting/Adjusting 3 Exiting Choose [Exit] with or , and press . NOTE • Keeping pressed for 2 seconds will also exit the Setting menu.
Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal. √ : Configurable ― : Not configurable Tab Setting / adjustable item Color Setting / adjustable value PC Video √ √ Adjusts the brightness of the backlight. Setting / adjustable content Brightness 0 - 30 Contrast 0 - 30 √ √ Adjusts the contrast. Black Level 0 - 30 √ √ Adjusts the image brightness. Sharpness Off/Low/High ― √ Adjusts the image outlines.
Tab Setting / Setting / adjustable item adjustable value Others Video Aspect Normal/100% PC Video ― √ Setting / adjustable content Configures the display range of the input image (overscan). “Normal” : Displays the input image with the outmost parts slightly cut off. * This is how display devices normally display images. “100%” : Displays most of the input image.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. Common Problems Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • If the problem persists, turn off the power, and then turn it on again a few minutes later. • Power indicator lights orange. • Press • Power indicator lights blue. • Check whether the power of the connected device is turned on.
Chapter 5 Reference 5-1. Specifications FDX1001 LCD Panel Size 10.4-inch (260 mm) TFT color LCD Surface treatment Anti-glare hard coating Surface hardness 3H Viewing angle Horizontal 160°, Vertical 130° (CR : 10 or more) Dot Pitch 0.2055 mm Display Area (H × V) 210.4 mm × 157.8 mm Resolution 1024 dots × 768 lines Max. Display Color Approx. 16.7 million colors PC input Horizontal Scan Frequency 24-50 kHz Vertical Scan Frequency 55-75 Hz (Non-interlace) Max.
FDV1001 LCD Panel Size 10.4-inch (260 mm) TFT color LCD Surface treatment Anti-glare hard coating Surface hardness 3H Viewing angle Horizontal 160°, Vertical 140° (CR : 10 or more) Dot Pitch 0.33 mm Display Area (H × V) 211.2 mm × 158.4 mm Resolution 640 dots × 480 lines Max. Display Color Approx. 16.2 million colors PC input Horizontal Scan Frequency 24-32 kHz Vertical Scan Frequency 56-70.5 Hz (Non-interlace) Max.
FDX1201 LCD Panel Size 12.1-inch (310 mm) TFT color LCD Surface treatment Anti-glare Surface hardness 3H Viewing angle Horizontal 160°, Vertical 140° (CR : 10 or more) Dot Pitch 0.240 mm Display Area (H × V) 245.76 mm × 184.32 mm Resolution 1024 dots × 768 lines Max. Display Color Approx. 16.7 million colors PC input Horizontal Scan Frequency 24-50 kHz Vertical Scan Frequency 55-75 Hz (Non-interlace) Max.
Connector Pin Assignment • D-Sub mini 15-pin connector 3 4 5 10 15 9 1 2 8 7 6 14 13 12 11 Pin No. 1 Signal Red video Pin No. 6 Signal Red video ground Pin No. 11 Signal NC* 2 Green video 7 Green video ground 12 Data (SDA) 3 Blue video 8 Blue video ground 13 H. Sync 4 NC* 9 NC* 14 V. Sync 5 Ground 10 Ground 15 Clock (SCL) (NC*: No Connection) 5-2. Glossary Afterimage The Afterimage is particular to LCD monitors.
5-3. Preset Timing The following table shows the factory preset video timing of the PC. ATTENTION • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. • If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display may still be incorrect even after the adjustment.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 Helmut-Grashoff-Straße 18, 41179 Mönchengladbach, Germany Phone: +49 2161 8210210 Fax: +49 2161 8210150 中国苏州市苏州工业园区展业路8号中新科技工业坊5B Phone: +86 512 6252 0100 Fax: +86 512 6252 1508 http://www.eizo.com Copyright © 2010-2012 EIZO NANAO CORPORATION All rights reserved. 3rd Edition-August, 2012 Printed in Japan. 00N0L623C1 (U.
