User`s manual

11
Chapter 2 Assembly
*1
DC power terminal block
Connector Pin Assignment Power sequencing
1 2 3
Pin No. Signal
1 DC12V
2 DET
*
3 Ground
*
Not connected
t1
10V
t1 < 50ms
10V
5V
t2
30ms < t2
DC12V
*2
Button extension connector:S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No. Signal
1 KEY0
2 KEY1
3 Ground
● How to assemble
ATTENTION
• Since the panel mounted on the monitor is tightened with a metal panel tting screw, please make the selection
considering the following points.
- Flat
- A thickness of 5 mm
- A structure having the strength to support xing with the screw.
1. Insert the monitor into the mount opening from the front.
The dimensions of a tting opening are the “Panel opening dimensions” shown in the gure above.
Mount opening
FDX1001T/FDV1001T: 257±0.5mm×219±0.5mm
FDX1201T: 298±0.5mm×245.5±0.5mm
(Panel opening dimension)
FDX1001T/FDV1001T/FDX1201T
Panel