User`s manual

9
Chapter 2 Assembly
FDX1201T
unit : mm (inch)
293 (11.5)10 (0.39) 10 (0.39)
272 (10.7)10.5 (0.41) 10.5 (0.41)
1 (0.04)
46 (1.81)
21.5 (0.85)
313 (12.3)
243 (9.6)
127 (5.0) 116 (4.6)
37.5 (1.48) 146 (5.7)
86.5 (3.41)
302.6±1 (11.9±0.04)
291 (11.5)
100 (3.9)
24 (0.94)
100 (3.9)108 (4.3)
10 (0.39)
25
(0.98)
25
(0.98)
52 (2.05)
10 (0.39)
100±0.5 (3.9±0.02)
32.8 (1.29) 32.8 (1.29)
247 (9.7)
33.9 (1.33)
185.5 (7.3)
DC power terminal block
Power specifications: see *1 below
Button extension connector
Connector specifications: see *2 below
M4 (VESA mounting holes)
(Dimension available for touch panel input)
(Dimension available for touch panel input)
Video input connector
S-Video input connector
D-Sub mini 15-pin connector
Power Jack（DC-IN）
（For use with an EIZO AC adapter only）
Serial port for the touch panel
Maintenance port
Φ4 (0.16)
（Enclosure mounting holes）
*1
DC power terminal block
Connector Pin Assignment Power sequencing
1 2 3
Pin No. Signal
1 DC12V
2 DET
*
3 Ground
*
Not connected
t1
10V
t1 < 50ms
10V
5V
t2
30ms < t2
DC12V
*2
Button extension connector:S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No. Signal
1 KEY0
2 KEY1
3 Ground
● How to assemble
1. Fasten screws through the mounting holes shown in the gure above (4 each on the left and
right sides) into the enclosure.
ATTENTION
• Please prepare screws that have a diameter of 3 mm and are suitable for use with the enclosure. (Screws are not
included with the monitor.)