User`s manual
14
Chapter 3 Settings and Adjustments
Chapter 3 Settings and Adjustments
Setting and adjustment of the monitor can be performed using the OSD menu.
The Quick-OSD menu is also available to directly operate frequently used functions without starting the OSD
menu.
3-1. Using Quick-OSD menu
Basic operation of Quick-OSD menu
1 Displaying Quick-OSD Menu
Press .
Setting/adjustment items are switched each time is pressed.
2 Setting/Adjusting
Use or for setting/adjustment.
3 Exiting
The Quick-OSD menu automatically closes when a button is not used for 5 seconds.
Functions
The adjustable settings in the Quick-OSD menu are shown below. The availability of items depends on the
input signal.
√ : Congurable ― : Not congurable
Setting / adjustable item PC Video Setting / adjustable content
Brightness 0 to 100
√ √
Adjusts the brightness.
Contrast 0 to 100
√ √
Adjusts the contrast.
H Position 0 to 100
√
― Adjusts the display position (horizontal).
V Position 0 to 100
√
― Adjusts the display position (vertical).
Color 0 to 100 ―
√
Adjusts the saturation.
Tint 0 to 100 ―
√
Adjusts the hue.
Image Size Fill All/16:9/4:3 ―
√
Changes the screen size.
* There are three sizes available for “16:9”. The sizes
switch in the following order:
.
NOTE
• When a PC is used for input, the “Auto Adjust” (automatic screen adjustment) menu is displayed when the and then
buttons are pressed. Press while the menu is displayed to automatically adjust the screen.