User`s manual

29
Chapter6Reference
●
To switch among input signals
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
●
To set input signal selection “Input Selection”
Settings Function
Auto Themonitorrecognizestheconnectorthroughwhichsignalsareinput.
Whenanexternaldeviceentersthepowersavingmode,themonitorautomaticallydisplays
anothersignal.
Manual Themonitordisplaysthesignalfromtheselectedconnectordespitethesignalinput.Select
theinputsignalfordisplayusingthe
operationbutton.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Selection” from “Tools”, and press
.
3. Select “Auto” or “Manual” with
or .
4. Press
to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all external
devices are in the power saving mode.