User`s manual

Chapter4PowerSavingFunctions

4-2. Enabling/Disabling Automatic Brightness

Adjustment

The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen

brightness automatically and comfortably by using the Auto EcoView function.

Attention

• Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView function.

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press

2. Choose “Auto EcoView” from “PowerManager”, and press

3. Select “On” or “Off” with

or .

4. Press

to exit.

Note

• As “Brightness” in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.

• The maximum brightness changes depending on the setting for “Blur Reduction” (see “Reducing motion blur “Blur

Reduction”” (page 15)) on the Adjustment menu. When the setting is changed, adjust the auto adjustment range for Auto

EcoView by adjusting “Brightness”.

4-3. Adjusting the Brightness of Indicator

The brightness of the power indicator (blue) can be adjusted. (Default setting: 4)

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press

2. Choose “Indicator” from “PowerManager”, and press

3. Select the indicator brightness “Off” or in the range from 1 to 7 with

or as desired.

4. Press

to exit.

4-4. Setting DisplayPort Power Save

This functionallows you to change the power setting of the DisplayPort of the monitor.

Attention

• For the “On” setting, the position of the window may be changed when the signal is switched. In such a case, turn the setting

to “Off”.

Procedure

1. Press

to turn off the monitor.

2. Holding

down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “DP Power Save” from “Optional Settings”, and press .

4. Select “On” or “Off” with

or , and press .

5. Select “Finish” with

or .

6. Press